How to Unload or Blacklist Module in Linux
Sometimes you need to unload a kernel module to load your own written code or you want to replace an out-of-box stock module to a vendor provided kernel module. So here you go. This guide tells you how to unload a module in linux. This guide will work in any Linux OS distro.
First you need to see if the module is really loaded or not and other modules those are dependent on the corresponding module that you want to unload.
You need the below two commands but I will guide you with an example too:
lsmod – lists all modules
rmmod – removes a module from the kernel
Follow the below command in a console to get the particular module details:
$ lsmod | grep <kernel_module_name_to_be_unloaded>
If the above command just returns without any output on the console then understand that the module is not at all loaded. There could be possible that either the module is already unloaded or the device for that particular module is not there in your system.
For example if you want to unload megaraid_sas LSI HBA controller driver from Linux kernel then follow as below:
$ lsmod | grep megaraid_sas
If you won’t find any output on the kernel then either the module is already unloaded or the LSI HBA controller is not at all present on your system.
megaraid_sas is the module name for LSI MegaRAID HBA controller driver.
After executing the above command you will see the details of the megaraid_sas module and other modules those are dependent on megaraid_sas. To unload the megaraid_sas module you need to unload the other modules too by executing the following command:
$ rmmod megaraid_sas
If it says ERROR: Module megaraid_sas is in use by xxx, zzz then unload the xxx and zzz modules first and then unload the megaraid_sas. In place of xxx and zzz there will be some real names.
I hope the above explanation just explains neatly how to unload a module in Linux.
When I say Linux I mean almost every Linux distro like Ubuntu, SLES, RHEL variants and all other possible Linux OS distro out there will follw the same procedure.
But here you have to remember one thing that this modification is not permanent and you will again see the megaraid_sas module loaded in the kernel the next time you will boot.
I have taken megaraid_sas module as an example to explain what are the possible things that must be considered while unloading a kernel module.
Now to permanently restrict a kernel module to load you have to make changes to the Grub config file or to the /etc/modeprobe.d/blacklist.conf file.
For example in Ubuntu you have to edit the command line parameters of the default OS in /boot/grub/grub.cfg grub configuration file.
Just add the following line in the command line parameter:
Add the follwing line at the end of /etc/modprobe.d/blacklist.conf file:
e.g: blacklist megaraid_sas
You might also like
Wondering how to learn Linux without having a Linux PC with you?? Is it really possible or you’re just kidding me?? Trust me it’s all possible and you just need
Vnc server and vnc viewer is used to Remote Access in most of the Linux machines like Fedora, RHEL, Ubuntu or any other Linux distro. Sometimes it is necessary for
Are you looking for some online linux terminals to work with?? Yes, there are some Linux terminals available online which will be helpful for you to learn Linux on the